Adrian Steel Load Runner Full Size Truck Racks are rated for the maximum load allowed by truck manufacturers. This rack is designed to fit all full sized pickup trucks with either an 8' or 6' bed. The width is adjustable to accommodate the different bed sizes. There is a removable rear bar allowing for convenient loading and unloading, and tie-down cleats to help secure loads on top or in the truck bed.

FEATURES:

2" high strength round tubing
51" width inside-to-inside of truss tubes
Fits most GM, Ford and Dodge full-size pickups
Black low gloss or white high gloss powder paint
Easy assembly and installation
Center crossbar standard
Removable center and rear crossbar, letting you carry tall items in the truck bed
2" square crossbars
Welded tie down cleats
NOTE: Rack payload capacity exceeds truck bed wall capacity rating. Consult your truck manufacturer for recommended bed capacity rating.
More >>

LOADFLEX offers a 250lb. payload capacity and is constructed of 1-1/2" x 1-1/2", 14 gauge wall steel tubing. Powder coat black paint finish provides years of maintenance-free service. Threaded holes in formed parts for ease of assembly. Rest arms easily adjust from 20-1/2" to 35" for wide ladders and feature slot-through bolt design to prevent separation. Plastisol rung stop prevent damage to ladder and rope hooks are welded-on for securing loads to the rack. LOADFLEX fits all late model GM, Ford and Dodge full-size pickup trucks.
More >>

Adrian Steel Load Runner Service Body Truck Racks, Models SBLR-8FR and SBLR-8FE, feature two-inch high-strength round tubing, a removable rear crossbar that allows tall items to be carried in the truck bed and convenient tie-down cleats to help secure loads on top or in the truck bed.

FIT: The Service Body Load Runner rack fits a variety of service bodies. The standard rack fits 8' service bodies with either a regular cab truck or an extended cab truck. It is universally designed to accommodate single and dual wheel chassis. Bodies that are 9' long will require the SBE9 that adds one foot of length to the standard rack. 11' long bodies will require the SBE11. PLEASE SEE RELATED ITEMS FOR EXTENSION KITS.

NOTE: Due to the large number of body configurations, this rack will not fit all bodies. To ensure proper fit, please contact us, and note the following exceptions:

Taillights must be vertical, external mount or bumper mount. Lower horizontal lights are acceptable.
Master Lock system may be incompatible with Service Body Load Runner.
SBEL extension leg kit is required for low profile bodies.
Service Body Load Runner is not compatible with canopy tops.
Ultra wide opening may result in mounting brackets protruding into the bed storage area.
The Load Runner Service Body Rack will not fit fiberglass service bodies.
FEATURES:

2" high-strength round tubing
50.7" width inside-to-inside of truss tubes
Fits most GM, Ford and Dodge chassis
Black low gloss powder coat paint
Easy assembly and installation
Center crossbar standard
Removable center and rear crossbar
2" square crossbars
Welded tie down cleats More >>

The Pro II Utility Rack from Kargo Master is one of the heaviest built racks on the market. Constructed of big 2" diameter round steel tubing, the Pro II Carrier offers a full 1,700 lbs. of cargo capacity. The round tube design is not only stronger, but it gives a sleeker design and reduces wind drag and noise. All Cargo Racks are treated with a yellow zinc plating that seals the metal from corrosion. They are then finished with a marine grade black powder coat that will not fade or dull. The Pro II Utility Rack features 5" swaged joints and gusseted cross bars for increased durability and strength. Full 17" long pre-drilled foot plates ensure the cargo rack is securely fastened to your truck bed. An optional no-drill clamp on mount kit is also available to eliminate the need to drill your truck bed. Sturdy upper rails on the Pro II Utility Rack keep cargo from shifting and provide handy grab loops at the rear of the truck. A quick release (no tools required) rear cross bar allows extra clearance for tall cargo being stored in the truck bed. The Pro II Cargo Carrier also includes an extra removable crossbar to reduce provide additional support. All Pro II Kargo Master racks are backed by a lifetime warranty.

Round Tubing: Heavy Duty 2" round tubing is used on the Pro II Utility Rack frame resulting in the heaviest rack on the market. Round tubing is stronger than square tubing, it looks better, and there is less wind drag and noise.
Heavy Duty Finish: All Kargo Master Cargo Racks are sealed with a yellow zinc plating and then powder coated for superior corrosion protection.
Gusseted Cross Bars: Gusseted cross bars and 5" swaged joints offer reinforcement and provide double the strength.
Removable Rear Cross Bar: A quick release rear cross bar allows for easy access to the truck bed and also provides extra clearance for tall cargo.
Extra Cross Bar: An extra cross bar provides additional support for cargo. The cross bar can be easily removed or positioned where needed.
Extra Tie Ons: Extra tie ons on the side posts provide additional places to securely tie down lumber, ladders, or additional cargo.
Optional No-Drill Mounts: Optional no drill mounts are available that allow users to attach the Pro II Utility Rack to their truck bed without having to drill. Available Here
Lifetime Warranty: All Kargo Master Pro II Cargo Racks are backed by a LIFETIME WARRANTY. More >>